رافعة لجميع التضاريس Sany SAC2200T

Sany Original painting all this terrain crane 220T (SAC2200T)
Year of manufacture: 2020
Main boom length: 76m
Jib length : 21m
Counterweight：76.5T
1. Core Lifting Performance
Maximum Rated Lifting Capacity: 220 t (at 3 m minimum radius, basic boom)
Maximum Lifting Moment (Basic Boom): 6664–7271 kN·m
Maximum Lifting Moment (Full-extended Boom): 3190–3540 kN·m
Minimum Rated Working Radius: 3 m
Maximum Working Radius (Full-extended Boom): 70 m
Rated Capacity at Full-boom Tip: ~2.5–2.8 t (at 73–75.5 m main boom length)
2. Boom & Jib System
Boom Type: 7-section, U-shaped high-strength steel telescopic boom
Basic Boom Length: 13.8–14.1 m
Full-extended Main Boom Length: 73–75.5 m
Maximum Combination Length (Boom + Jib): 92.6–106.6 m (standard) / Up to 107 m (optional)
Auxiliary Jib Length: 16–43 m (depending on configuration)
Jib Luffing Angles: 0°, 20°, 40°
Maximum Lifting Height (Main Boom Only): 76 m (full extension)
Maximum Lifting Height (Boom + Jib): 93–107 m
3. Dimensions & Vehicle Body
Overall Length：15.53–16.43m
Overall Width：2.995–3.00m
Overall Height：4.0 m
Load Capacity (Max Lifting) 220000kg
Net Weight (Operating Weight)：54670–60000kg
Gross Weight (Max Total Mass)：54800–60000kg
Counterweight (Total)：76500kg
4. Travel & Chassis
Drive Configuration: 10×8×10 (5-axle, all-wheel steer)
Maximum Travel Speed: 80 km/h
Minimum Turning Radius: 9.5–10 m
Minimum Ground Clearance: 270–325 mm
Approach/Departure Angle: 16–20° / 12–17°
Maximum Gradeability: 45–58%
Fuel Tank Capacity: 500 L
Axle Load (Front/Rear): 10.45–12 t / 10.4–11.6 t
5. Work & Operation Speed
Main Winch Line Speed (No Load): 130 m/min
Main Winch Line Speed (Full Load): 45 m/min
Auxiliary Winch Line Speed (No Load): 130 m/min
Auxiliary Winch Line Speed (Full Load): 45 m/min
Maximum Slewing Speed: 1.5–2.0 r/min
Boom Telescoping Time (Full Ext/Ret): 660 s
Boom Luffing Time (0° to 80°): 60–90 s
6. Stability & Outriggers
Outrigger Span (Long × Trans): 8.3–9.46 m × 8.5–9.045 m
Tail Swing Radius: 4.85–4.86 m
Total Counterweight: 76.5 t (76500 kg)
8. Environmental & Safety
Operating Temperature Range: -20 °C to +40 °C
Safety System: Load Moment Limiter (LMI, ±3% accuracy), overload alarm, emergency stop, anti-slip protection
Hydraulic Protection: Load-sensing constant-power system with balance valves & anti-cavitation controls