المحرك MAN V12-2000 لـ MAN D2862 LE496
هل أنت مهتم بالإعلان؟
1/4
€1
السعر بدون ضريبة القيمة المضافة
≈ $1.11
≈ AED 4.07
≈ AED 4.07
€1.24
بما في ذلك سعر الضريبة على القيمة المضافة
الفئة:
المحرك
رقم مرجعي:
D2862LE496
رقم الأصل بالكتالوج:
V12-2000
نوع قطعة الغيار:
قطعة غيار أصلية
سنة التصنيع:
2023-12
الموقع:
النمسا Hörschingعلى بعد 7279 كم منك
النمسا Hörschingعلى بعد 7279 كم منك
تاريخ النشر:
٠٤/٠٩/٢٠٢٤
رقم التعريف في دليل عروض البائع:
D2862LE496
المواصفات
قوة المحرك:
٢٬٠٠٠ حصان
عدد الأسطوانات:
12
نوع المحرك:
على شكل حرف V
توربو:
وقود:
ديزل / مازوت
يورو:
6
مبرد بيني:
سعة المحرك:
٢٤٬٠٠٠ سم مكعب
ماركة صندوق التروس:
ZF
المحرك
القوة:
2000 حصان (1470 kW)
توربو:
مبرد بيني:
يورو:
Euro 6
علبة السرعات
الماركة:
ZF
حالة المركبة
حالة المركبة:
جديد
الضمان::
1 سنة
هامة
إن هذا العرض يمكن الحصول من خلاله على المعلومات الأولية فقط. أما التفاصيل المتعلقة، فيرجى الاتصال بالبائع.
نصائح للشراء
معلومات الاتصال بالبائع
R.Schwarzmuller
اللغات:
الإنكليزية
+358 50 53...
عرض
+358 50 5345498
+358 9 231...
عرض
+358 9 23165797
عنوان
النمسا, فيينا, 4063, Hörsching, Flughafenstrasse 3
التوقيت المحلي الخاص بالبائع:
02:25 (CEST)
معلومات الاتصال بالبائع
ETC EUROPE TRUCK FINLAND OY
النمسا
8 سنوات في Machineryline
+358 50 53...
عرض
+358 50 5345498
+358 9 231...
عرض
+358 9 23165797
بيع ماكينات أم مركبات؟
يمكنك القيام بذلك معنا!
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG