مخرطة المعادن Traub TNK 36

This 6-axis TRAUB TNK 36 was manufactured in 2003. It features a maximum spindle speed of 6,300 rpm and a main spindle bore of 36 mm. The machine is equipped with advanced capabilities such as tool monitoring, rigid tapping, and a high-pressure coolant system. If you are looking to get high-quality turning capabilities, consider the TRAUB TNK 36 horizontal turning machine we have for sale. Contact us for further details.
Location: DE
Control Brand: TRAUB
Control Model: TX8i (64-bit)
Counter Spindle: Motor Spindle
Driven Tools: yes
Spindle Power: 10.7 kW
Through-spindle Coolant: yes
MDE Interface: Yes
Tool Monitoring: Yes
Rigid Tapping: Yes (without compensation chuck)
Main Spindle Bore: 36 mm
Main Spindle Drive Power: AC 6.7 / 10.7 kW
Top Turret Stroke X/Z: 50 / 100 mm
Rear Attachment Stroke X: 73 mm
Rear Attachment Stroke Y: ±50 mm
Main Spindle C-Axis: Yes
Hainbuch Change Parts: Yes
Hainbuch Setup Aid Base Body: Yes
Hainbuch Manual Change Device: Yes
Counter Spindle C-Axis: Yes
Counter Clamping Pressure Device: Yes
Workpiece Ejection Device: Yes
Hainbuch Axfix Chuck: Yes
Upper Tool Carrier: Yes
Electronic Gearbox: Yes
X3 Cross Axis for Front Unit: Yes
Front Unit: 5-position
Driven Tools on Front Unit: Yes
Cut-Off Side Machining Station: Yes
Driven Tools on Cut-Off Side Station: Yes
Workpiece Unloading Device: Gripper
Coolant Tank Capacity: 230 l
Coolant Pressure: 7 bar
Coolant Flow Rate: 50 l/min
Internal Coolant Supply: 30 bar
High Pressure Coolant: 120 bar (front and rear machining station)
Coolant Filter: Knoll VRF 150/750 Vacuum Rotary Filter
Suitable Materials for Filter: Aluminum, Plastic, Brass, Steel
Wash Gun: Yes
Connected Load: 22 kW
Maximum Bar Length: 3 m
Maximum Bar Diameter: 36 mm
Operating Voltage: 400 V, 3~, 50 Hz
Control Voltage: 24 V AC
Valve Voltage: 24 V DC
Clutch Voltage: 24 V DC
Total Installed Power: 33 kW
Total Rated Current: 60 A
Bar Feeder Year: 2003
Chip Conveyor Discharge Height: 950 mm
TECHNICAL DATA
ADDITIONAL EQUIPMENT OPTIONAL
FMB turbo 5-42 XT / 3200"C" Bar Feeder
Hinged Belt Chip Conveyor
Guide Tubes D25
D36
Running Workpiece Stop
Shank 16 × 16 mm
Brankamp CMS 100 Collision Monitoring